Additional pictures at the bottom of the page.
- Vented for minimum turbulence and back pressure
- Available in two heights
- Shape designed to compliment the lines of the KLR 650
- Excellent coverage of torso.
- Very quiet cockpit area, with much less noise and turbulence than stock
- No back pressure
- Allows full steering lock in both directions.
- Made from 4.5mm thick (3/16") DOT certified impact resistant plastic.
- Laser cut for precision aerodynamics and fit
- Includes storage cover, micro-fiber cleaning towel, and mini-spray bottle of windshield cleaner.
- Installation Instructions
- All about our windshields
- How to choose the right windshield height for you.
- Forum Postings on our KLR shields
| Size | Height | Width (mid) | Width (high) | Price | Order |
|---|---|---|---|---|---|
| Large | +10.5" = +26,5cm | +5.5" | +4.5" | $160 | |
| Medium | +9" = +23cm | +5.5" | +4.5" | $160 | |
| Wind Deflector | For KLR riders over 6' tall | $60 | |||
| Other Stuff for your Bike | |||||
| Replacement Well Nuts | Dia: .375" Len: .665" 5mm screw 6 pieces | $6 | |||
| Heated Grip Kit | Heater elements for use with your stock grips | $50 | |||
| Heated Seat Kit | Heater element for use with your stock seat Two kits required to heat both rider and passenger seats | $50 | |||
| Seat Modification Kit | Relieve the pressure on your hip bones Includes foam for both rider and passenger seats | $25 | |||
Laminar Wind Deflector for Calsci KLR Windshield
The KLR windshield is mounted at a steep angle. This means we cannot make an XL shield, as the top edge of the shield gets too close to the rider's face. We have designed a laminar flow deflector which has been very successful in improving airflow for our tallest KLR customers. If you're over 6' tall, this deflector on the Calsci windshield will give you superlative performance. The deflector attaches to the windshield with double stick tape. No holes to drill, installation takes 1 minute.
